Explore

• Quaternary Ammonium (Benzalkonium chloride) & Biguanide (Polymeric Biguanide Hydrochloride) Compound 0,09%.
• Non-toxic ampholytic surfactants & sequesterants.
• No colour or fragrance.
• Water to balance.

F10 Wipes are a disinfectant impregnated surface wipe for use on equipment such as thermometers, and for hand decontamination when washing facilities are unavailable.

F10 Wipes are made from white, non-woven, rayon blend fabric impregnated with F10 Wipe solution. They have a
slight pine odour.

Composition: Quaternary ammonium and biguanidine compounds (0.046%), non-toxic ampholytic surfactants and sequesterants and alcohol.

PACK SIZE: 100 wipes

The 150mm Rain Gauge is a good quality traditional rain gauge without the price tag.

This rain gauge is highly accurate and suitable for primary producers, graziers, commercial, nurseries, farmers and gardeners.

Features:

• Easy to read graduations allows measurements up to 150mm.
• Quick and simple installation by a multi-hole mounting plate.
• UV resistant material built to withstand harsh Australian conditions

Refill sticky tape roll for the Sticky Roll Mini Kit Fly Catcher Kit.

Non-toxic. Non-polluting.

24 metres.

The 250mm Rain Gauge is a good quality traditional rain gauge without the price tag.

This rain gauge is highly accurate and suitable for primary producers, graziers, commercial, nurseries, farmers and gardeners.

Features:

• Easy to read graduations allows measurements up to 250mm.
• Quick and simple installation by a multi-hole mounting plate.
• UV resistant material built to withstand harsh Australian conditions.

Mr Crystal Concrete Tank & Trough Repair Kit is the simple answer to repairing all those leaking concrete tanks and troughs. It is safe for drinking water tanks.

Mr Crystal is a cement based waterproofing compound that chemically reacts with moist cement based substrates forming insoluble crystals in the capillary tracts of the substrate waterproofing the concrete yet still allowing the surface to breathe.Whether they be on your farm, small property or even a household block, Mr Crystal will provide the means of easily repairing any leaks you may have in any concrete water holding structure.

Mr Crystal comes as a full kit to enable you to repair your concrete tanks and troughs with ease.

Mr Crystal is applied to the surface of the concrete. Within concrete are millions of tiny voids. Mr Crystal migrates through these voids by osmosis and capillary action, generating in-soluble crystals as it travels. Mr Crystal is in fact a catalyst, which causes your existing concrete to grow in-soluble crystals. This means you have a large amount of material in the structure, which can generate in-soluble crystals without adding material that will expand cracks. Mr Crystal is stimulated by the by-products of your existing concrete and hydration. This means, each time water is present within the substrate, Mr Crystal will activate.

How does it protect the reinforcement?

Mr Crystal protects the reo in two ways. Firstly, it protects the reo from the elements by excluding water and air from reo tract. Secondly, Mr Crystal chemically protects the reo by restoring the alkalinity of the substrate thus reducing the acidity of the environment in which the reo is located.

Limitations of the product:

Mr Crystal is designed to work on commercial grade concrete that has basic structural integrity. To achieve success with this product you must ensure that, structure is made of concrete containing building cement (commonly known as Portland cement). Movement must be controlled by adequate foundations and reinforcement and finally the structure must be treated according to the enclosed directions for use.

Coverage:

1 Kilogram will treat/cover 4.5 metres of crack.

Surface Preparation:

Apply to cement based surfaces that are free from dirt, dust, grease, oil, efflorescence and other contaminants. With tanks and troughs you can use a scraper and wire brush. Using an angle grinder will give fast accurate results. With a grinder, remember, you are not trying to cut concrete, just "bullying" the contaminants off the surface. Structure to be repaired must have basic structural integrity. Clean out and patch cracks larger than 0.25mm thick with a sand and cement render. Use caustic soda solution to clean oil contaminated surfaces then thoroughly hose down to completely remove contamination. Wet down thoroughly the surface to be coated immediately prior to application.

Temperature:

For best results, apply Mr Crystal when outside temperature is between 10C - 25C.

Mixing:

Mix only the amount that can be used in 10 -15 minutes. Mix .5–1kg with water and bring to a thick paste. Mix thoroughly and add water or product to bring the mixture to a thick creamy, yet just paintable consistency. The final ratio should be about 1kg powder to 375 mL water.

Application:

Mr Crystal can only be applied to wetted cement-based substrates (splash some water on the crack as you go). Apply a strip of mixture 60mm wide with the enclosed brush directly over the crack, working the mixture well into voids. To prevent segregation and keep a uniform mixture stir the mixture frequently during the application and dip brush deep into the mixture so that a thick coat can be applied. You may notice that the first coat appears patchy. As this first coat begins to go tacky, apply a second coat. The "tacky" first coat will "grab" the second coat enabling you to build the mixture up to a total of 6mm thick.

Where to apply Mr Crystal:

Mr Crystal can be applied over or adjacent to cracks, suspected weak points, cold joints, porous surfaces, around fittings. Mr Crystal can be applied to either side of the face of the concrete so you can fix a crack on the outside of your tank while leaving the water within. If you need to work on the inside of your tank you will need to remove the water and wait for the product to have an initial set. Times will vary with temperature however 4 hours is usually adequate. We suggest that you don’t focus a pressure pump stream on your new work in the 1st day as it may wash it off. ie Let the water trickle in. 

Mr Crystal migrates through the voids in the concrete and has been known to migrate up to 400mm from the point of application. The resultant crystal growth is the waterproofing effect of this product. The raw product itself is not waterproof (in fact, it is highly absorptive by design). 

When applying Mr Crystal where there is flowing water, remember not to be too concerned that some product may wash off. It is important to focus on the intact material (that hasn't washed off) to ensure that it is correctly applied, cured and stimulated.

Tip: If the water is running down a vertical crack and washing the material off try this. Take some short drinking straws, squeeze one end into the crack and leave at a sharp downward angle. This will take a good bit of the water away from the wall. A piece of tie wire with one end flattened will also be effective. Even a shovel or hammer handle leaned against the leak will divert some of the water away from the area to be treated (much like how water runs off the end of your finger in the shower) They can be removed as product hardens.

Curing:

Protect the surface from rain or frost during initial cure. (Approx 2-3 hours). Water cure the treated surface by mist spraying with water 3-4 times daily for 3 days if you wish to hasten the crystal growth. This is helpful on structures that are not intended to hold water. (Eg. Concrete silo bases) In the case of tanks, troughs etc. simply putting some water back in will provide adequate hydration. Even 20 litres of water added to an empty tank with lid replaced will provide a good humid environment to hasten crystal growth.

Tip: On a sunny or hot outside wall, draping a wet bag over your work will help.

SIZE: 4kg

Download the Crystalfix Directions Booklets here.

Vetsense PVP-Iodine surgical scrub. 

Action/Indications:  A pre-operative antiseptic and hand cleansing agent. It is non-irritant, non-staining. 

Warnings:     Do not ingest. Keep out of reach of children

Presentation:     Liquid, 5L

WSD Trough Blox is a treatment for stock water troughs to control algal growth and to provide a copper supplement to livestock.

Type of Preparation: WSD Trough Blox contains 63g/Kg copper in a slowly soluble block for use in stock water troughs.

Indications: To control algal growth in plastic and concrete troughs. Milking sheep, dairy cattle & dairy goats: Suitable for use in the water supplies of animals producing milk for human consumption.

Dosage: Always refer to the label. One 200g block is sufficient for 7000 litre capacity trough for 30 days. One 2kg block will treat 70,000 litres for 30 days.

Advice On Use: WSD Trough Blox are safe to use with most livestock water supplies. Do not use in steel tanks or troughs. Do not overdose water supplies when using this product. WSD Trough Blox should not be used in human drinking water. Do not use in areas or districts where high copper levels are known to occur or where there is a risk of chronic copper toxicity. Care should be exercised with livestock fed a ration supplemented with copper or if copper bullets have been administered. For troughs of less than 7000 litre capacity, each 200g block should be divided into the proportion appropriate to the volume of the trough. 

WSD Trough Blox's are designed for prevention and control of algae rather than killing algae. If a trough has heavy algae growth it is advised to clean the trough first and then use a WSD Trough Blox to control the future algae growth. 

SIZE: 200g

• Bubblegum scented
• Multi purpose and government approved
• May be used in toilets (non-septic systems only)
• May be used on household floors and walls.

Active constituents: Each Litre contains (as ions) 30g/L Benzalkonium Chloride (a quaternary ammonium compound)

Directions for use:
Dilution Rate: Dilute 1 part of disinfectant with 40 parts of clean water (25mL of disinfectant per 1L of water)
How to apply: Remove as much surface dirt as possible before applying diluted solution. Scrub or swab diluted solution into the surface. Wash off after 5 minutes with clean water.

Warnings:
DO NOT mix with detergents or chemicals.

DO NOT use in septic systems.

NOT TO BE USED FOR any purpose, or in any manner, contrary to what is on the label unless authorised.

Precautions:
If by accident skin is contaminated with this product, wash immediately with plenty of water. Wear gloves when preparing dilution and while applying the product.

Protection of wildlife, fish, crustaceans and environment: Poisonous to fish and crustaceans. DO NOT contaminate streams, rivers or watercourses with the chemical or used containers.

VOLUME:  5L

The EnviroSafe European Wasp Trap catches European wasps which are often attracted to the odours of the backyard barbecue. 
The trap is designed to be safe and easy to use. 
Setting the trap in the weeks leading up to entertaining will help keep these dangerous pests away.

Non-toxic and environmentally friendly, the EnviroSafe European Wasp Trap is also completely safe and won’t harm bees.

Features:
 • Effectively traps dangerous European Wasps
 • Uniquely formulated and powerful bait
 • Bee friendly
 • Non-toxic
 • Environmentally friendly
 • Harmless to pets

• Warm or hot water activates the pellets much faster.
• The most effective way to set up a stable is by adding water into Proteq bags standing up for activation.
• Bedding can take up to 48 hours to fully break down and fluff up. Keep this in mind when you are tempted to add extra bedding at initial setup.
• To top up stalls pellets can both be added directly on top of bedding and watered, or two bags will fit into a standard wheelbarrow for activation.

EnviroSafe European Wasp Bait is unique – a powerful, non-toxic bait that attracts dangerous European wasps. Made from food-grade ingredients, EnviroSafe European Wasp Bait is completely safe for use around your family, pets, and home, and won’t harm bees!

Non-toxic and environmentally friendly, the EnviroSafe European Wasp Bait is also completely safe and won’t harm bees

Features:
 • Effectively traps dangerous European Wasps
 • Uniquely formulated and powerful bait
 • Bee friendly
 • Non-toxic
 • Environmentally friendly
 • Harmless to pets

Pack Size:  2 pack

• Pre-operative skin disinfection
• Surface and equipment disinfection.

• Antiseptic agent, non-irritant, non-staining.

RainMaxx Rain Gauge is a highly accurate, heavy-duty rain gauge designed for farmers, graziers and keen weather watchers. Rain or irrigation water collects in the inner tube, with overflow flowing into the outer chamber, allowing measurements up to 280mm.

Features:

• Measures up to 280mm
• Inner tube with overflow outer chamber design
• Virtually unbreakable construction
• UV-stabilised to resist discolouration
• Easy-read graduations in mm and inches
• Quick and simple installation with mounting bracket
• Made in Australia

Hibitane contains chlorhexidine one of the most widely used and effective disinfectants and germicides. Non-irritant. Controls a wide range of bacteria even in the presence of foreign matter. 
Widely used in sheep dips to control build up of bacteria in dip wash.

VOLUME: 5L