Disinfectants & Cleaners

• Broad spectrum virucidal disinfectant.
• Powerful - independently proven effective against all virus families affecting man and animals. 
• Friendly - to man, animals and the environment.
• Complete control - aerial, surface and water system disinfectant.

SIZES: 50g; 1kg;  5kg

For information on how to use and dilute Virkon S for various applications please see information sheets below:
- Disinfectant Foot Dips
- Surface and Farm Equipment Disinfection
- Aerial Disinfection

F10SC is a total spectrum disinfectant that, unlike other strong disinfectants on the market, has no adverse side effects on people, animals, or on equipment and surfaces. It is ecologically friendly and biodegradable, and carries a wide range of registrations and approvals from around the world.

In Australia, F10SC is registered by the APVMA for use in animal production and housing facilities, approved by AQIS for use in food export processing as a non-rinse disinfectant, and is also listed by the TGA as a Hospital Grade Disinfectant.

The benefits of using F10SC include:

• Kills all types of pathogen – F10SC is bactericidal, virucidal, fungicidal, sporicidal.
• Minimal chance of microbial resistance due to F10SC’s unique benzalkonium chloride and polyhexamethylene biguanide combination of actives and mode of action.
• Non-corrosive, non-toxic, non-tainting, non-irritating, aldehyde-free.
• Highly cost effective.
• Biodegradable & ecologically friendly.
• Tried, tested, independently verified and documented, and approved around the world.

F10 SC Disinfectant is

• A biodegradable multipurpose disinfectant for all hard surfaces, equipment and airspaces.
• Aldehyde and Lodine Free
• Non-Irritating “Non-Corrosive”

Active Constituents:

54g/L BENZALKONIUM CHLORIDE
4g/L POLY (HEXAMETHYLENE BIGUANIDE HYDROCHLORIDE) HYDROCHLORIDE

How to dilute F10SC:

Use only as directed on the label.

Disinfection of hard surfaces and equipment:
Clear away debris, clean and pre-rinse with water
Apply F10 super concentrate disinfectant in accordance with dilution table as
a wash, or through a foamer or spray and leave to air dry.

Disinfection of air spaces:
Apply F10 SUPER CONCENTRATE DISINFECTANT in accordance with dilution table using an atomizer/fogger and leave to dry. Replace cap after use.

No not mix with soaps and other chemicals.

F10SC Dilution Guide

Select the correct dilution ratio and contact time based on the type of micro-organism being treated.

Micro-organism	Dilution	Contact Time
Gram positive bacteria (e.g. Staphylococcus aureus)	1:1000 (with water)	2 minutes
Gram negative bacteria (e.g. Pseudomonas aeruginosa)	1:500 (with water)	2 minutes
Fungi, yeasts, moulds (e.g. Candida albicans)	1:500 (with water)	15 minutes
Fungal spores (e.g. Aspergillus niger)	1:250 (with water)	30 minutes
Viruses (e.g. Newcastle Disease Virus)	1:500 (with water)	10 minutes
Rabies virus	1:500 (with water)	30 minutes
Infectious Bursal Disease	1:250 (with water)	20 minutes
Parvovirus	1:125 (with water)	30 minutes

 

How long will 200ml of F10SC disinfectant last?
If you use 2L of a workable solution per day for High Level Disinfection, you will have enough F10SC for 25 days.

Pack size: 200ml, 1L, 5L

TriGene II is a virucidal disinfectant concentrate which is ideal for bacterial, virus and fungal control in veterinary hospitals and animal accommodation. It is a noninitant, nontoxic, noncorrosive and nonhazardous bactericidal, fungicidal, virucidal, mycobacterial and sporicidal agent.

Composition: Each L contains n-alkyl dimethyl benzyl ammonium chloride 50 g, didecyl dimethyl ammonium chloride 75 g, poly (hexamethylene) biguanide hydrochloride 1 g.

INDICATIONS: Suitable for general disinfection of all surfaces (floors and walls), kennel areas, examination tables, surgery walls, food and water bowls and bedding. May be used on rubber, vinyl and most hard surfaces, including food preparation areas.

TriGene is effective against bacteria, fungi, viruses and bacterial spores in veterinary hospitals and animal accommodation, including the following:

Bacteria. Listeria monocytogenes , Salmonella sp., legionella sp., Escherichia coli , Staphylococcus aureus , Streptococcus sp., Proteus vulgaris , Pseudomonas sp., Mycobacterium fortuitum , Bacillus sp., Clostridium sp., Campylobacter sp., Klebsiella sp., Mycobacterium tuberculosis and Bordetella bronchiseptica .

Fungi. Microsporum sp., Candida albicans , Trichophyton sp., Penicillium sp., Aspergillus niger and Saccharomyces cerevisiae.


Viruses. Parvovirus, equine herpesvirus, infectious bursal dis¬ease virus (IBD), influenza, Newcastle disease, orthopoxvirus, feline calicivirus (FCV), feline infectious peritonitis, feline panleukopenia virus and feline rhinotracheitis.

DOSAGE AND ADMINISTRATION:

Diluted solution keeps for 12 months.

General disinfection of all surfaces. Dilute 1:100 for general use and intermediate risk areas. Dilute 1:50 for high risk or soiled areas.

Examination tables. Dilute 1:20 for rapid disinfection of high risk areas and consult tables.

Food and water bowls. Dilute 1:50. Clean off soil before disinfection. Rinse thoroughly before use.

Bedding and clothing. 50 mL/4 kg load. Place in conditioner dispenser of washing machine, soak for 30 mins.

Body spillages. Dilute l:50 for spillages and organic matter when risks of infection are higher.

Large animal accommodation. Dilute 1:100.

Fogging. Dilute 1:100.

Physical Description & Colour: Clear, green liquid.

Odour: Mild odour.

Major Health Hazards: irritating to eyes and skin, harmful if swallowed.

SIZES: 5L;

PVP-Iodine 10% Solution. Action/Indications: Antiseptic agent, non-irritant, non-staining.

Active Constituents: 100mg/mL Povidone Iodine

Warnings: Do not ingest. Keep out of reach of children

Directions of Use: Use undiluted for pre-operative skin disinfection, wounds, and burns.

SIZES: 500mL; 1L

F10 Disinfectant Hand Rub is an alcohol free hand sanitiser for high level waterless hand decontamination.
Use 2-4mL on the hands for skin decontamination when a washbasin is unavailable.

Composition:

• Quaternary Ammonium (Benzalkonium chloride) & Biguanide (Polymeric Biguanide Hydrochloride) Compound 0,09%.
• Non-toxic ampholytic surfactants & sequesterants.
• Slight citrus fragrance.
• Light pink colourant.
• Water to balance.

F10SC XD is the same as F10SC Disinfectant in terms of performance, but contains additional surfactants that allow the one-step cleaning and disinfection of lightly soiled surfaces that may be necessary in certain instances.

F10SC XD is a total spectrum disinfectant that, unlike other strong disinfectants on the market, has no adverse side effects on people, animals, or on equipment and surfaces. It is ecologically friendly and biodegradable, and carries a wide range of registrations and approvals from around the world. In Australia, F10SC XD is registered by the APVMA for use in animal production and housing facilities and is approved by AQIS for use in food export processing as a non-rinse disinfectant.

The benefits of using F10SC XD include:

• Kills all types of pathogen – F10SC XD is bactericidal, virucidal, fungicidal, sporicidal
• Minimal chance of microbial resistance due to F10SC's unique benzalkonium chloride and polyhexamethylene biguanide combination of actives and mode of action
• Non-corrosive, non-toxic, non-tainting, non-irritating, aldehyde-free
• Highly cost effective
• Biodegradable & ecologically friendly
• Diluted solution remains active for long periods of time
• Tried, tested, independently verified and documented, and approved around the world 

Active Constituents:

54.0g/L BENZALKONIUM CHLORIDE
4g/L POLY(HEXAMETHYLENE BIGUANIDE) HYDROCHLORIDE

Directions for Using F10SCXD Disinfectant:

Use only as directed on the label.

Disinfection of hard surfaces and equipment:
Clear away debris, clean and pre rinse with water. Apply F10SCXD Veterinary Disinfectant/Cleanser in accordance with dilution table as a wash, or through a foamer or spray, then rinse off with safe water.

Disinfection of air spaces:
Apply F10SCXD Veterinary Disinfectant/Cleanser in accordance with dilution table using an atomiser/fogger and leave to air dry.

Replace cap after use. Do not mix with soaps and other chemicals.

F10SC XD Dilution Guide

Select the correct dilution ratio and minimum contact time based on the micro-organism being treated.

Micro-organism	Dilution	Minimum Contact Time
Gram positive bacteria (e.g. Staphylococcus aureus)	1:1000 (with water)	2 minutes
Gram negative bacteria (e.g. Pseudomonas aeruginosa)	1:500 (with water)	2 minutes
Fungi, yeasts, moulds (e.g. Candida albicans)	1:500 (with water)	15 minutes
Fungal spores (e.g. Aspergillus niger)	1:250 (with water)	30 minutes
Viruses (e.g. Newcastle Disease Virus)	1:500 (with water)	10 minutes
Rabies virus	1:500 (with water)	30 minutes
Infectious Bursal Disease	1:250 (with water)	20 minutes
Parvovirus	1:125 (with water)	30 minutes

Note: Ensure surfaces remain wet for the full contact time and always prepare fresh solutions.

F10SC XD Disinfectant/cleanser is available in a clear, unscented version.

Sweetmat Disinfection Mats are for foot traffic and light wheeled trolleys where it is important that all traffic passes over them. They are available in three sizes.

These mats feature a permeable upper fabric which enables disinfection of footwear, or anything else crossing it (dogs, carts, etc.).

Disinfection mats typically use 75% less disinfectant than a foot bath.

Features & Benefits:

• Superior cost-effective protection against contamination.
• Proven effectiveness in reducing cross contamination and the risk of spreading disease.
• Saves money, as disinfection mats typically use 75% less disinfectant liquid than a foot bath in a similar situation.
• Saves time, as they are quicker and easier to maintain than other methods.
• Bottom and sides are of non-permeable material to prevent leakage or leaching of disinfection solution.
• Simply pour solution on top of mat to fill: 85 x 60
• holds 8 litres.
• Blue colour

Inner Core:

The inner foam core is rebonded-polyurethane. Virgin ïbath tubÍ foam in its original block form (like some similar products) is far too soft and short-lasting for commercial uses, such as in disinfection mats in high-traffic areas.

Fabric:

The upper surface of the mat is a 100%-woven polypropylene mesh. This mesh is inert which means it will not shrink or warp and is UV resistant. The base of the mat is reinforced-PVC, for strength with UV resistance.

Thread:

Sweetmats use Dabond thread, as it is specifically designed for harsh outdoor environments. Dabond is the industry standard for sail making, military supplies, tents and seat belt manufacture due to its overall strength.

SIZES:

85 x 60cm

85 x 85cm

85 x 180cm