Disinfectants

F10SC is a total spectrum disinfectant that, unlike other strong disinfectants on the market, has no adverse side effects on people, animals, or on equipment and surfaces. It is ecologically friendly and biodegradable, and carries a wide range of registrations and approvals from around the world.

In Australia, F10SC is registered by the APVMA for use in animal production and housing facilities, approved by AQIS for use in food export processing as a non-rinse disinfectant, and is also listed by the TGA as a Hospital Grade Disinfectant.

The benefits of using F10SC include:

• Kills all types of pathogen – F10SC is bactericidal, virucidal, fungicidal, sporicidal.
• Minimal chance of microbial resistance due to F10SC’s unique benzalkonium chloride and polyhexamethylene biguanide combination of actives and mode of action.
• Non-corrosive, non-toxic, non-tainting, non-irritating, aldehyde-free.
• Highly cost effective.
• Biodegradable & ecologically friendly.
• Tried, tested, independently verified and documented, and approved around the world.

F10 SC Disinfectant is

• A biodegradable multipurpose disinfectant for all hard surfaces, equipment and airspaces.
• Aldehyde and Lodine Free
• Non-Irritating “Non-Corrosive”

Active Constituents:

54g/L BENZALKONIUM CHLORIDE
4g/L POLY (HEXAMETHYLENE BIGUANIDE HYDROCHLORIDE) HYDROCHLORIDE

How to dilute F10SC:

Use only as directed on the label.

Disinfection of hard surfaces and equipment:
Clear away debris, clean and pre-rinse with water
Apply F10 super concentrate disinfectant in accordance with dilution table as
a wash, or through a foamer or spray and leave to air dry.

Disinfection of air spaces:
Apply F10 SUPER CONCENTRATE DISINFECTANT in accordance with dilution table using an atomizer/fogger and leave to dry. Replace cap after use.

No not mix with soaps and other chemicals.

F10SC Dilution Guide

Select the correct dilution ratio and contact time based on the type of micro-organism being treated.

How long will 200ml of F10SC disinfectant last?
If you use 2L of a workable solution per day for High Level Disinfection, you will have enough F10SC for 25 days.

Pack size: 200ml, 1L, 5L

• Broad spectrum virucidal disinfectant.
• Powerful - independently proven effective against all virus families affecting man and animals. 
• Friendly - to man, animals and the environment.
• Complete control - aerial, surface and water system disinfectant.

F10SC XD is the same as F10SC Disinfectant in terms of performance, but contains additional surfactants that allow the one-step cleaning and disinfection of lightly soiled surfaces that may be necessary in certain instances.

F10SC XD is a total spectrum disinfectant that, unlike other strong disinfectants on the market, has no adverse side effects on people, animals, or on equipment and surfaces. It is ecologically friendly and biodegradable, and carries a wide range of registrations and approvals from around the world. In Australia, F10SC XD is registered by the APVMA for use in animal production and housing facilities and is approved by AQIS for use in food export processing as a non-rinse disinfectant.

The benefits of using F10SC XD include:

• Kills all types of pathogen – F10SC XD is bactericidal, virucidal, fungicidal, sporicidal
• Minimal chance of microbial resistance due to F10SC's unique benzalkonium chloride and polyhexamethylene biguanide combination of actives and mode of action
• Non-corrosive, non-toxic, non-tainting, non-irritating, aldehyde-free
• Highly cost effective
• Biodegradable & ecologically friendly
• Diluted solution remains active for long periods of time
• Tried, tested, independently verified and documented, and approved around the world 

Active Constituents:

54.0g/L BENZALKONIUM CHLORIDE
4g/L POLY(HEXAMETHYLENE BIGUANIDE) HYDROCHLORIDE

Directions for Using F10SCXD Disinfectant:

Use only as directed on the label.

Disinfection of hard surfaces and equipment:
Clear away debris, clean and pre rinse with water. Apply F10SCXD Veterinary Disinfectant/Cleanser in accordance with dilution table as a wash, or through a foamer or spray, then rinse off with safe water.

Disinfection of air spaces:
Apply F10SCXD Veterinary Disinfectant/Cleanser in accordance with dilution table using an atomiser/fogger and leave to air dry.

Replace cap after use. Do not mix with soaps and other chemicals.

F10SC XD Dilution Guide

Select the correct dilution ratio and minimum contact time based on the micro-organism being treated.

Note: Ensure surfaces remain wet for the full contact time and always prepare fresh solutions.

F10SC XD Disinfectant/cleanser is available in a clear, unscented version.

• Superior cost-effective protection against contamination.
• Proven effectiveness in reducing cross contamination and the risk of spreading disease.
• Saves money, as disinfection mats typically use 75% less disinfectant liquid than a foot bath in a similar situation.
• Saves time, as they are quicker and easier to maintain than other methods.
• Bottom and sides are of non-permeable material to prevent leakage or leaching of disinfection solution.
• Simply pour solution on top of mat to fill: 85 x 60
• holds 8 litres.
• Blue colour

• Quaternary Ammonium (Benzalkonium chloride) & Biguanide (Polymeric Biguanide Hydrochloride) Compound 0,09%.
• Non-toxic ampholytic surfactants & sequesterants.
• Slight citrus fragrance.
• Light pink colourant.
• Water to balance.

iO Stable & Kennel Disinfectant is recommended for disinfecting kennels, stables, aviaries and poultry cages. It may also be used in toilets (not septic systems) and on household floors & walls.

Active Ingredient: Benzalkonium Chloride 30g/L

Dose Rates & Administration Instructions:

Dilute 1 part of iO Stable and Kennel Disinfectant with 40 parts of clean water (25ml of product per litre of water).

How to use iO Stable and Kennel Disinfectant:

Remove as much surface dirt as possible before applying the diluted solution. Scrub the diluted solution in to the surface. Wash off after 5 minutes with clean water. 

DO NOT mix with detergents or other chemicals.

DO NOT use in septic systems.

Dilute rate: 25mL disinfectant per litre of water.

iO Chlorodet Farm Disinfectant is a multi-purpose sanitising solution for general farm use.

Active Constituent: 55g/L Chlorhexidine Gluconate

SIZES: 5L;