Dog Harnesses - No Pull

The EzyDog Cross Check Harness is the perfect dog harness for dogs that pull or are in training. Rather than putting pressure on the dog's neck, the Cross Check harness utilises the patent pending girth checking system to alleviate pulling.

We know that dog training can be complex, so we focused on making this dog training harness easy to fit and use. Simply place the front loop over the dog's head, feed the rear webbing around the dog's girth and fasten the plastic buckle. Once fitted, the girth checking system will provide control and comfort for both dog and owner.

Best Escape Proof Dog Harness
The figure 8 configuration ensures that the harness always fits securely around the dog's body and has been tested to be escape proof. This makes the Cross Check the best harness for small, medium and large dogs that have been known to escape from dog harnesses in the past.

The Best Martingale Harness for Small, Medium and Large Dogs
The Cross Check Harness has been designed with all dogs in mind - small dogs, medium dogs, large dogs. It will fit all dog breeds and is suitable for puppy training. The Crosscheck Harness is perfect for new pet owners looking for a harness to assist in their training process.

A Dog Training Harness and a Dog Walking Harness
The multiple leash attachment points allow you to quickly change between standard walking and training whilst on your walk. With a silicone-lined neck section and premium nylon webbing construction, the Cross Check harness has been made with comfort and quality in mind.

Features:

• Girth checking system
• Dual Stainless Steel D rings
• Escape Proof
• Easy fit figure 8 configuration

COLOURS:  Black;  Red

SIZES:  XSmall;  Small;  Medium;  Large;  XLarge
See attached size guide to determine correct size.

• Gently stops dogs pulling and allows effective training.
• Control from the front and the back, using a double ended lead. (see "Balance Harness Training Packs" for Harness/Lead combos) or just connect at the front, with a normal lead.
• Easy to fit and adjust - comfortable and strong.
• Restores balance and allows effective lead training.

This is a great Walking Harness, and an effective training alternative for dogs with neck issues, or if a head halter is not appropriate.

If your dog is an escape artist, you may also like to consider a Connector Strap as back-up security - they are easily attached as backup security on Balance Harnesses - connected between the Front D Ring (or Back D Ring) and clipped to the dog's collar.

NOTE:
This is a training tool and should be used as part of a training program to reduce your dog's tendency to pull on lead.

If you are looking for a more general purpose Harness, then look at our Black Dog Dog Harness.

Do not use this Balance Harness to tether your dog!
Check-out the Black Dog Dog Harness.

Do not use this Balance Harness as a restraint in a Car!
Check-out the Black Dog Dog Harness.

Do Not use this Balance Harness with a lead longer than 2 metres!
Check-out the Black Dog Dog Harness.

The Balance Harness might break if you use it with any of the above, so that's why we suggest you check-out the Black Dog Dog Harness.

MEASURING for a Balance Harness:

We size Balance Harnesses by the Girth Measurement of a dog.

Don't just try to guess by breed type - there's lots of variation in sizes of individual dogs, so a Girth Measurement will get the right size harness first time.

Use a soft tape measure.
*Place the tape measure around your dog's body, just behind the front legs.
*Pull it to be a tight, snug fit and read off the measurement.

Now check the chart shown, to select the correct size.

SIZES:  Girth measurement 

Mini:  40 - 50 (cm)
Small:  47 - 63 (cm)
Medium:  55 - 72 (cm)
Large:  66 - 95 (cm)
Extra Large:  92 - 124 (cm)

COLOURS: 
Blue
Red
Green
Pink
Purple
Orange

The Black Dog Wear Balance Training Pack includes the Balance Harness and a Double Ended Lead colour matched to the Harness. This pack is for training Walking Control with pulling dogs.

The Black Dog Balance Harness helps stop your dog pulling on the lead - it helps you train your dog to balance correctly on all four feet and not rely on the lead. They learn to walk comfortably without the need to pull.

Features: 

• Gently stops dogs pulling and allows effective training. 
• Control from the front and the back, using a double ended lead or just connect at the front, with a normal lead. 
• Easy to fit and adjust - comfortable and strong. 
• Restores balance and allows effective lead training. 

This is a great Walking Harness, and an effective training alternative for dogs with neck issues, or if a head halter is not appropriate.  If your dog is an escape artist, you may also like to consider a Connector Strap as back-up security - they are easily attached as backup security on Balance Harnesses - connected between the Front D Ring (or Back D Ring) and clipped to the dog's collar. 

NOTE: This is a training tool and should be used as part of a training program to reduce your dog's tendency to pull on lead. If you are looking for a more general purpose Harness, then look at our Dog Harness.

Do not use this Balance Harness to tether your dog ! Check-out the Dog Harness. 
Do not use this Balance Harness as a restraint in a Car! Check-out the Dog Harness. 
Do Not use this Balance Harness with a lead longer than 2 metres! Check-out the Dog Harness.

The Balance Harness might break if you use it with any of the above, so that's why we suggest you consider our Black Dog Dog Harness instead for those scenarios. 

MEASURING  for a Balance Harness: 
We size Balance Harnesses by the Girth Measurement of a dog. Don't just try to guess by breed type - there's lots of variation in sizes of individual dogs, so a Girth Measurement will get the right size harness first time.

Check the sizing guide to see where the "Girth Measurement" should be taken.  
* Use a soft tape measure.
* Place the tape measure around your dog's body, just behind the front legs.
* Pull it to be a tight, snug fit and read off the measurement.
* Now check the size chart to select the correct size.

Rogz Stop-Pull Dog Harness is the perfect harness for walking and training your dog. Recommended for strong and erratic pullers, the Rogz Stop-Pull Harness applies soft pressure around the girth when the lead is attached to correct behaviour and halt your dog. 

Features:

• Stop Pull: When used with the Classic Lead, corrects behaviour through soft applied pressure.

• Double Stop Pull:  When used with the Multi Lead Stop Pull: 1. Halts via applied pressure. 2. Re-redirects your dogs head.

• B-ring & Stopper:  Slide stopper up against B-ring to set girth fitting.

• Stow-Away Elastic: Holds lead attachment in place while off lead.

• Double Reflective Stitching:  Reflective yarn is woven into the webbing and non-shift pad for night-time visibility.

• Comfortable:  Padded for extra comfort & support. Control Harness transfers pressure from your dog’s neck to its chest.

The Rogz Stop-Pull Harness can be used with a regular lead or a double ended lead depending on the level of control required.

SIZES: 
To determine the correct size for your dog measure their girth, which is the circumference of your dog's chest just behind the shoulder and elbow. 

The Sporn Non-Pull Mesh Dog Harness fits like a glove and is designed to curb moderate to heavy leash pullers. Made for style, comfort and control, this harness features an elasticized mesh chest piece that moves with your dog. It’s designed to humanely control any size dog without choking, and the one-piece harness is easy to put on and take off. The padded restraint sleeves offer extra comfort under the front legs.

Key Benefits

• Patented system "gives" with your dog's natural movements
• Designed to stop the hardest pullers humanely without choking
• Padded restraint sleeves allow for a comfy fit under front legs
• One-piece ergonomic structure
• Made with the highest quality nylon

Sizing Information

Small: 9–12 inch (23–30 cm) neck, for dogs approximately 8–25 lbs (3.6–11.3 kg)
Medium: 12–17 inch (30–43 cm) neck, for dogs approximately 25–60 lbs (11.3–27.2 kg)
Large/XL: 16–24 inch (41–61 cm) neck, for dogs approximately 60–100 lbs (27.2–45.4 kg)

Precautions: Recommended for walking purposes only. Do not leave on dog unattended. Not designed for use as a car harness or tie-out.

COLOUR: Black only. Note some images may depict red on parts of the harness, however this harness is available in Black only.

A spinoff of the Original Sporn Halter, the Big Dog Halter is designed specifically for large breed dogs who are aggressive leash pullers. It is guaranteed to stop your dog from pulling using the patented "Sporn Effect". It's easily transformed into a standard collar when the pull-control function is not needed.

All materials and components are made of the highest quality nylon and nickel-plated hardware to reduce weathering.

FEATURES:

• Great for leash training
• Stops pulling instantly
• Reflective restraints for safety 
• Padded underarm restraints for comfort
• Hand washable
• Lifetime guarantee (excludes chewing)

COLOUR - Black

WARNING: Do not leave halter on dog unattended. Not to be used as a tie-out or car harness.

The HALTI Harness is designed to steer the dog from the chest and shoulders, giving full control to the owner.

Extremely comfortable for the dog to wear.

SIZE  BREED (EXAMPLES)

Small:  Terriers

Medium:  Spaniels and Collies

Large:  Great Danes, Mastiffs and Rottweilers

COLOUR: Black/Red